HOW TO MOVE A HOME GYM

If you plan to move a home gym, for safety reasons, you should have at least two able bodied people to do the job. Even though you may be thoroughly familiar with the structure of the gym and how the frame parts go together, even if you have the gym’s assembly instructions, take several pictures from different angles, being careful to get clear views of the gym cable routings. Be sure that the pictures show whether the cables go over or under each of the gym’s pulleys. A little extra effort at this point of the gym’s disassembly can save a lot of grief during the gym’s reassembly, which might not be for several weeks or even months.

Begin by removing all of the gym attachments, such as, lat bars, triceps ropes, ab straps, ankle straps, chains, weight selection pins, etc. and weight stack shrouds or protective shields and put them aside where no one will trip over them. The goal is to disassemble the home gym to the point where the frame pieces are small enough to fit easily through the smallest doorway that they will have to pass through and be light enough to be moved safely. Tie down any parts that pivot, like pec deck movement arms, leg curl, leg extension pieces or anything similar to keep them from swinging around when the pieces are actually moved to avoid scraping walls or injuries, like pinched fingers.

Download 1039 Weider Home Gym PDF manuals. User manuals, Weider Home Gym Operating guides and Service manuals.

1. This is the product manual for the York Fitness MagAir (R700, 3000 & 5000) Rowing Machine, products code 5666, 5223 & 5543. Buy Now Default Title - £0.00 Quick look.
2. Gold's Gym Home Gym GGBE1774.0. Gold's Gym User Manual POWER SERIES GT 2000 exercise rack GGBE1774.0.
3. For a limited time, get: Free Shipping on Nautilus ® Upright Bikes; Free Shipping on Nautilus ® Recumbent Bikes; $99.99 Shipping on Nautilus ® Treadmills; Offers only valid within the 48 contiguous states of the continental U.S.

The next step is to remove the weight stacks. Start by disconnecting the cable from the selector rod or top plate of the weight stack. Tape the cable to a convenient frame piece out of your way, as much as possible; you may have to move it later when the gym's frame is taken apart. Caution, weight stacks are heavy and once loosened from the frame, it may require two people to stabilize it. With that in mind, disconnect the weight stack guide rods (the two steel shafts that the weight plates ride up and down on ) at their tops where they attach to the frame. Note, each brand and model of home gym employs a different method of keeping the tops of the guide rods in place. The important consideration is that once they are loose, most weight stacks are unstable and can tip or fall out of the frame. Be prepared for sudden weight shifts of the stack. Once the guide rods are loosened, starting with the top weight plate, lift it up and over the top of the guide rods and hand it to someone to stack on the floor, out of the way. Continue the process, removing one weight plate at a time, until the guide rods are empty. Limit these temporary stacks to two or three plates each. When the guide rods are empty, remove the pair of guide rods from the base of the gym’s frame. If the gym has more than one weight stack, repeat the procedure for each of the other weight stacks.

When all of the weight stacks have been removed from the gym, step back and study the gym’s frame. It is not necessary to take apart every last piece of the frame. Look for points on the top and bottom of the frame where the frame bolts can be removed in a few places, that will leave manageable sections of the gym’s framework intact. Once that has been decided, be sure that the cables are taped to the correct sections of the frame and that no cable are allowed to flop around. Secure the gym cables at both ends if necessary, only removing the cables from the gym’s pulleys where you need to in order to be able to separate the frame pieces. Break down the frame much as necessary to handle the pieces safely. When removing frame bolts, put them back in the holes from which they were extracted, along with their respective washer, lock washers and nuts as soon as the frame pieces have been separated enough to do so. This will keep any of the frame bolts and hardware from getting lost or later being installed in the wrong places.

Never transport the weight plates while they are on the guide rods. Doing so can bend the guide rods and cause the weight plate bushings to detach. At this point the frame sections, the weight plates, weight selection keys and the gym attachments can be relocated to the new site. Be careful not to damage any of the gym’s upholstery.

When all of the gym’s components are at the new site, choose a location for the gym, decide which way you want the gym to face and be sure to allow enough room to allow for the maximum extension of the gyms movement arms and enough additional room for safe passage. Don't forget to consider the maximum height of the gym, an often over looked dimension. To reassemble the home gym, after inspecting the gym's main frame pieces for shipping damage, just reverse the procedures that you followed when you disassembled the unit. Before using any positions on the gym, be certain that the cables are securely fastened to the weight stack selector rods, top plates or other anchoring points. Double check the cable routing, observe that all of the gym cables are seated properly in their pulleys and not binding on any cable guides or frame pieces. Install the gym attachments and test each position with no extra weight plates attached to the selector rods. All of the cables should move freely. If not, find the cause and correct the trouble. Insert the weight selector pins and repeat the tests with a few plates attached. When testing the various gym positions, use caution; for example, do not pull the lat bar toward your face incase the lat cable comes loose. If you are satisfied that everything is working properly, try each position with heavier loads.

How To Use A Multi Gym

If all checks out well, your relocation is complete, but before allowing family members to use it, it is advisable to have preventive maintenance done on your home gym by a qualified fitness equipment service company to be sure that it is safe to use.

The Perfect Multi-Gym Pro brings the challenge of gym workouts into your home. Targeting muscles in the arms, chest, core, and back, the system can be used as a doorway pull-up bar or for sit-ups, push-ups, and dips. The padded handles provide 3 grip positions for normal, close, and hammer grip pull-ups. Looking to add intensity? The Multi-Gym Pro features a 300 lb. weight limit, making it safe to use with a weighted vest.

Gold Multi Gym G-4700 Manual Instructions

Multi Gym Uk

• Portable gym that can be used as a doorway pull-up bar or for sit-ups, push-ups, and dips; 300-pound weight capacity
• Extra wide handles for 3 grip options: close, normal or hammer grip pull-ups; padded handles ensure comfort for sit-ups, push-ups, and dips
• When turned over, use padded handles for sit-ups, push-ups, and dips
• Patented door frame guard and two-way adjustable design; fits door frames up to 33' wide and up to 6' deep
• Assembled dimension are: 15' x 38' x 14'