. This is an Roland PC-300 driver for Microsoft Windows 98 / Microsoft Windows Me. Features: - Multiclient support - As many as four applications can simultaneously use each MIDI OUT/MIDI IN port. Simultaneously use four units. This is the driver necessary for connecting the PC-300 to a Macintosh running OS 9 and Opcode's OMS version 2.3. Today, USB is obsolete because ROLAND did not deem it necessary to provide driver for Windows Vista and Seven. Although the USB connection was the selling point of the product. I guess the surprise will be the same for people today who buy the A-500S to the next Windows version change. Windows roland pc 300 driver 64 7. History 1939 to 2000. Free driver download: Download & Installation. Support; PC-300; Support. PC-300 USB Driver Version 1.4.0 Windows 98/ME. This is an Roland PC-300 driver for Microsoft Windows 98 / Microsoft Windows Me. Tutorial Method 2 Inatall Single Old Roland/edirol Thirsty Drivers on Windows 10. Then Select 'ADVANCED OPTIONS' then Select 'STARTUP SETTINGS' then hit restart and when the next menu comes up after restart select option number '7' to boot without driver signing. Now you will be Ready to install the Driver for the Roland PC-300 in Windows 10. CAMM-1 Driver for Windows XP, ver 1.10 32 Bit Model: GX-24, GX-00. CX500 CM-500 8.82 MB.

• Roland Cutstudio Drivers For Windows 10
• Roland Drivers Windows 8.1

PC-300

Updates & Drivers

• PC-300 USB Driver Version 1.3.0 Mac OS X

  This is a driver for using the PC-300 on MacOS X.
  - Compatible with Apple's standards of CoreMIDI
  - Universal Binary (This driver can work on both CPU, Intel processors and PowerPC processors.)
  - Single/Dual processor support
  - Compatible with Mac OS X v10.5 'Leopard' as of OCT. 26, 2007

• PC-300 USB Driver Version 2.0.0 Windows XP/2000

  This is the driver for connecting the PC-300 to a PC running Windows XP or Windows 2000.

• PC-300 USB Driver Version 1.4.0 Windows 98/ME

  This is an Roland PC-300 driver for Microsoft Windows 98 / Microsoft Windows Me.
  Features:
  - Multiclient support
  - As many as four applications can simultaneously use each MIDI OUT/MIDI IN port.
  - Simultaneously use four units

• PC-300 USB Driver OMS for Mac Classic (OS 9)

  This is the driver necessary for connecting the PC-300 to a Macintosh running OS 9 and Opcode's OMS version 2.3.5 or later.

• PC-300 USB Driver FreeMIDI for Mac Classic (OS 9)

  This is the driver necessary for connecting the PC-300 to a Macintosh computer running OS 9 and FreeMIDI.

• Clean-All USB Driver Utility

  This utility clears out all Roland USB Windows drivers and should be used if you are having difficulty installing your USB driver.
  Note: You will have to reinstall the drivers for any other Roland device that is using a USB connection for Audio or MIDI.

Hi; new to the forums but had a break through last night (& want to Share..!) on some old equipment I had laying around that I fixed and used to work in the XP days... I started tinkering with an old version of FLStudio in Win10 and broke out the Roland PC-300 and tried to hook it up and like most others ran into Driver Issues...
I came across a few internet posts here and there on the subject; I came across one that looked very promising too... They took the UM-1 Driver and re-scripted it for the PC-300; but when I tried that file code it would not recognize the unit still...
(Source, Poster 'DieMongo': http://gkmcd.blogspot.com/2011/12/rolan ... ows-7.html )
I've been an IT technician for over 20 years now and looked at the DeviceId of the unit and long story short the Code used in the Modified UM-1 Driver was looking for a device at USB address ending with '9'... But my PC-300 was reporting as everything exactly the same except the last digit was '8' (which I suppose Identifies the Hardware/Firmware Revision and/or DeviceId)...
As soon as I changed that Digit and Installed the Driver the Keyboard Power Light Turned Right On and FLStudio had it all Setup as an Input for use... Im even able to even turn the power switch on and off and the PC still detects it each time; so far...
How to Install the following Driver:
First you will need to RESTART YOUR PC IN ADVANCED MODE:
Click the Windows/Start Button and begin to type 'Startup Options' and select the Counter-Clockwise Arrow Circle Icon; this will launch the Advanced Restart Menu...
You will see a menu pop up and you will select the 'Restart' Button under the 'Advanced Startup' Section;
NOW THIS WILL RESTART YOUR PC AND IF YOU TRY IT WHILE READING THIS REMEMBER THE FOLLOWING:
When the Blue Restart Screen Appears select the 'TROUBLESHOOT' option.
Then Select 'ADVANCED OPTIONS' then Select 'STARTUP SETTINGS' then hit restart and when the next menu comes up after restart select option number '7' to boot without driver signing...
Now you will be Ready to install the Driver for the Roland PC-300 in Windows 10.
Do the following:
Plug in the Roland PC-300 & let windows Detect the unit; it will install as an 'Unknown Device', next
Unzip Drivers & Open Folder; navigate the Sub-Folders into the 'Files' Folder; DO NOT RUN THE INSTALL/SETUP FILES!!!
Locate the 'RDIF1009' INF 'Setup Information' File & Right Click on that file &
Select 'Install' from the Menu.

Roland Cutstudio Drivers For Windows 10

A Security Message will pop up approve that and a second one will popup and choose to install the driver anyways, a few moments will pass and another message will pop up saying the install is complete and now the Power Light on the unit should turn on... Done..!
If you check your Device Manager it should be now listed under 'Sound, Video, and Game Controllers' as the Roland PC-300

Roland Drivers Windows 8.1

I am by no means taking any credit (or liability) for making this file(s) (change/alteration) other than changing one digit from a '9' to an '8', copying & pasting one line of code into the next section (that others had done to get somewhere) of code and now writing this post; is the Extent of my doings in the matter...
DOWNLOAD & USE OF THE FILE IS AT YOUR OWN RISK!!!